Industries
Power centers for medical infrastructure
Energy supply for hospitals, clinics, medical and diagnostic centers, laboratories.
Medical facilities operate continuously, and some loads cannot tolerate even a momentary power interruption. This challenge is addressed not by a single generator, but by an integrated energy supply scheme where critical loads, permissible interruption times, and redundancy levels are predefined.
Facility Challenges
- — Separation of loads into critical and non-critical
- — Guaranteed power supply for operating rooms, intensive care units, and diagnostic equipment
- — Facility operation during external grid outages
- — Reduced dependence on grid capacity limitations
- — Provision of heating and hot water supply for the facility
4DA Energy Solutions Ltd. Solutions
- — On-site generation as the primary energy source for the facility
- — Backup power and automatic transfer switch (ATS)
- — UPS for loads with zero permissible power interruption
- — Cogeneration for thermal load coverage
- — Dispatching and monitoring of operating modes
Possible System Configurations
- — Energy center operating in parallel with the grid with automatic transfer to island mode
- — Modular power sizing based on actual load profile
- — N+1 redundant units for critical load segments
- — UPS and energy storage in the guaranteed power supply scheme
Reliability and Redundancy
- — Reliability level is defined at the technical concept stage
- — Load classification by criticality and permissible interruption time
- — Testing regulations for backup power sources
- — Equipment availability control throughout the entire service life
Integration with Existing Infrastructure
- — Connection to existing switchgear of the facility
- — Coordination with the existing thermal scheme
- — Integration with SCADA and APCS systems
- — Phased commissioning without disrupting medical facility operations
Service throughout the entire lifecycle
- — Routine technical maintenance and diagnostics
- — Provision of spare parts and consumables
- — 24/7 monitoring and support
- — Long-term service programs and O&M
Implementation
How the Project is Implemented
Unified 4DA Energy Solutions Ltd. Workflow from Initial Data to Power Plant Operation.
Initial Data Collection
Electrical and thermal load profile, available gas resource, connection points, reliability requirements, and facility site.
Preliminary Study
Technical feasibility verification: gas balance, operating modes, grid constraints, and preliminary power plant configuration.
Technical Concept
Facility energy balance, composition of main and auxiliary equipment, thermal scheme, layout, and CAPEX/OPEX estimation.
Financial Model
Power supply economics, transaction structure, and selection of implementation model — EPC, EPC-M, or EPC-F.
Contracting
Agreement on scope of work, schedule, guaranteed performance indicators, and risk allocation among project participants.
EPC and Commissioning
Design, procurement, construction and installation works, commissioning, and bringing the power plant to design performance.
Operation and Maintenance (O&M)
Scheduled maintenance, spare parts, operational mode management, and availability reporting throughout the service life.